On all treks and on some trekking peaks the most appropriate form of footwear will be sturdy walking boots. Among the advantages of boots over shoes are that they provide support to your ankle on uneven terrain, allow the use of their stiff edges on steep or slippery terrain and also that they resist the ingress of water, dust and stones over their top edge.

When looking at boots the choice can be overwhelming. The decision on which ones to buy needs to be informed by many factors such as how often you are likely to use them, in what terrain you are likely to use them, the shape of your foot and inevitably the price. However, one factor that should never be compromised on is the comfort and fit of the boot. It will not be long into a trip with ill-fitting boots that you will be aware of their shortcomings.

Mansalu 1.JPG

Climb high with the right footwear.

In boot design and construction there are many factors to look at;

  • a fully integral 'sewn-in' tongue is essential for waterproofing
  • gore-tex or equivalent lining for waterproofing
  • a tough 'toe-box' to protect your toes
  • protective rubber rands around the toe and sometimes heel will help your boots to last
  • cushioning on the sole to help reduce sore feet at the end of the day
  • robust lace loops
  • stitching lines are natural weak points so not too many of these and not in locations where they will wear

You may also consider changing the footbeds or adding an insole, especially if you have a high arch. You will, of course, need to make this decision at the same time as buying the boots in order to get the fit correct.

To stand the best chance of getting boots that fit you well you need to visit a shop with a range of manufacturers and models. certain boot brands commonly produce boots of a certain shape, ie. a narrower or wider fit. If your feet are of a certain shape it is worth identifying the most appropriate manufacturer for you. In addition, many of the more specialist retailers will have staff who are trained to take a number of measurements of your foot in order to advise the most suitable boot. Take your time and try a number of boots and don't feel pressured to buy a boot that doesn't feel right, you will almost certainly regret it.

Mount Kilimanjaro - approaching the summit

Robust footwear is the key to a successful trek or summit.

When fitting your boots, remember to wear the socks that you would wear when walking. You need to ensure that when walking you do not experience any 'heel-lift' inside the boot and that there is sufficient space around your toes for you to wiggle them. Any tighter than this and it is likely that they will either rub and give you blisters or be so constricting as to restrict the blood supply and lead to cold toes. Good stores will have a ramp and perhaps some simulated rough ground that will allow you to try out the boot during different movements and orientations.

Once you have decided on a boot you need to wear it in. Most stores will allow you to return or exchange a boot as long as it shows no signs of wear and has not been used outside. Therefore it may be worth plodding around the house and climbing the stairs a few times to make double sure they are right. Once you are happy you need to wear the boots as much as possible, preferably on longer day trips on similar terrain to the actual trip. This can also help to wear-in your feet as much as the boots! You can then try out some different strategies for avoiding discomfort such as blisters. This may include taping your heels as a preventative measure or using liner socks.

Atlas Mountains - M'Goun Trek (2)

Rocky trails require sturdy footwear.

Below the snowline, it is possible to use B0 graded hiking boots as described above. However, on mountaineering expeditions above the snowline, where crampons will be used, it is necessary to have boots that are graded as B1 or higher depending on the altitude and conditions. If you have any queries regarding the grade of boots that you require for your trip please do not hesitate to contact us.